Orange inflatable buoy signaling with a single breath uni-directional valve for hose lp jacket or oral inflation 1m height, 10 cm in width, 2.7 kg of nylon lifting thrust to 210d with thermoplastic polyurethane lamination, the support for overpressure valve and pipe in thermoplastic polyurethane metallic components of stainless steel 304.
Line holder Omer for nylon lanyards or elastic lanyards. Ideal for spearfishing to keep the marker ball always next to you. Thanks to the small opened loop you can stop the lanyard at the desired length, so when you are fishing the lanyard will not unleash.
Height 180 cm, 5 cm solas reflective band, extremely light, diver reflective writing below, integrated mesh pocket for spool, 20 m spool included, stainless steel d-ring, double carabiner, stainless steel, inflation connector mouth for jacket low pressure hose, overpressure valve, velcro closure system.
Omer Master Torpedo buoy with double bladder for spearfishing. The inner tube is completely protected from bumps, scratches and accidental cuts, but at the same time it is easy to replace in case of damage. Surface marker flag removable. 20 meters of nylon orange line and carabiner included in the package.
Cressi Sub Boa Competizione spherical in shape, slightly flattened to offer less resistance to the wind and equipped with an incorporated inflatable flag suitable for freediving, spearfishing and diving. Made of PVC, it has a sturdy attachment point for the line on the underside. It is supplied complete with a light 25 m floating line, equipped with a small 150 g cylindrical ballast lead. Features Diameter: 30 cm height: 23 cm Height with flag: 55 cm Volume: about 7 liters Weight
Material: 1680 denier Nylon bonded with PVC + Nylon draining mesh Sizes: 29 x 34 x 78 cm Volume: 77 lt. Features: the bag can be folded by bringing the sides together and closed with the zip, 2 carrying straps located on the edges of the bag, central padded handle.
The Buoy Omer Caravella is an excellent signal balloon for fishing in the blue due to its size as well as the materials used. The same materials with which the tubulars are made were used to make this signal balloon. Once mounted, the flag exceeds half a meter in height making the buoy clearly visible from boats. The pressure with which it can be inflated is 1.5 bar and for this reason the loading and unloading valve is the same as present in motorcycles. In the lower part there are two stainl
This training buoy is dedicated to freediving. It has a durable outer material, an external zippered pocket, four external handles for pre-dive preparation and two external D-rings. The large internal space allows you to store the rope during transport. The inflation system is oral with an overpressure valve. The freediving rope can be connected to a stainless steel D-ring. The flag is included.
Torpedo shape for an easy and not tiring towing • In bright orange color, clearly visible. Double air chamber for greater safety and vertical position • Six universal attachments, the ideal towing buoy. The peculiar Torpedo shape minimizes resistance when towing the buoy: it is like not having it. Equipped with 20 m cable and six universal connections that allow you to connect additional accessories of any type. The buoy is made in bright orange color, clearly visible even from
The OPEN SEA 15 BUOY is the simplified version of the OPEN SEA 29 buoy, it is made with high resistance PVC dropstitch technology. The buoy is very light and hydrodynamic and can be inflated up to a pressure of 15PSI (1bar). OPEN SEA, when deflated, can be rolled up with a very small footprint. 300 The buoy is also equipped with 6 stainless steel D-rings in the interior, one in the front and one in the rear. It is supplied with a high visibility flag measuring 30x30cm with a detachable pole
Very resistant, high visibility inflatable buoy. Equipped with a belt for fixing to the body, it does not limit the athlete's performance. It is equipped with an internal pocket functional for the transport of personal effects. And an external pocket in the emerged, transparent area, where to place any watertight devices for monitoring the swim or satellite reception. It is built in reinforced material to adapt to demanding situations.
Particularly resistant professional balloon (torpedo) as it is made of nylon resin with internal injection of polyurethane. Rolled up on itself without cover, for quick removal and with double elastic rubber closure. Three inflation systems: through the regulator from the lower area, with the mouth or by connecting the whip of the jacket (in depth) or of the drysuit. Lead base to maintain verticality. “Duck beak” heat-sealed inside to prevent accidental emptying of the surface balloo
And obtain 5 € of discount on your first order.