It allows double tanks up to 2x12 liters of certain jacket.

M25x2 valve for double tanks with central separator 10 + 10 lt. Output DIN / INT convertible, 200 Bar.

Scubapro cylinders are made with the highest quality and safety materials and standards They are offered in 5 different litraggi: 5, 10, 12, 15 and 18 liters The new single and double connection taps are robust and reliable, made with advanced technologies that place them at the top of the category as reliability and safety. The internal air passages have been carefully studied in the project in order to guarantee maximum performance also and above all with the highest performance

Modular single connection valves for tank. • M25X2 thread. • INT/DIN connector.

Steel alloy with molybdenum chrome 34CRM04. Sheet metal fabrication cycle. Valves; Single and twin valve type in chromeplated matt finish brass, with DIN-INT connector and thread M 25 x 2. Outer treatment: shot-blasted with selected grit, 1 protective zinc layer, 90 micron thick, 5 layers of double-component epoxy primer, 3 layers of polyurethane finishing painting with \wet on wet system, black-white sectors complying with EC regulations.

Short green rubber flyer

Scubapro cylinders are made with the highest quality and safety materials and standards They are offered in 5 different litraggi: 5, 10, 12, 15 and 18 liters The new single and double connection taps are robust and reliable, made with advanced technologies that place them at the top of the category as reliability and safety. The internal air passages have been carefully studied in the project in order to guarantee maximum performance also and above all with the highest performance

Stainless steel clamp for cylinder, including screw. Reflective tube. Available in different sizes.

Best Divers threaded plug for taps DIN 200 BAR in black nylon, suitable for scuba cylinders.

Divemarine black fixed tank handle.

M25x2 valve for double tanks with central separator 15 + 15 lt. Output DIN / INT convertible, 200 bar

Mares cylinders one-piece structure in 3CrMo4 chrome molybdenum steel alloy (DIN 17200). - Operating pressure: 232 bar - Material: tempered steel - Internal treatment: phosphating and anti-corrosion treatment - black external treatment: soft-touch polyurethane Available in 10, 12lt

Cylinders Mares, single piece, in alloy of chrome molybdenum steel 3CrMo4 (DIN 17200). - Operating pressure: 232 bar - Material: hardened steel - Internal treatment: phosphate and anti-corrosion treatment - Esternal treatment: Soft-touch polyurethane, black - Valves: twin connection Available in 15lt

Handle for tank transport.

Made in Italy cylinder network a Best Divers production. Fully assembled and tested in our laboratories.

Short black rubber handwheel

Best Divers DIN / INT adapter for 8 mm Allen key, pack of 2pcs.

Cart for transporting cylinders. Adjustable handle in three heights Foldable on itself Material: aluminum Range: 65 kg Wheels: polyurethane Color: orange and gray

clamp kit with support and stainless steel cylinder D ring

Divemarine Tank Bands H50mm.

Porta pastiglia valvola compatibile disponibile per le seguenti marche: Coltri/Effesub Scubapro Cressi Mares Scubatec Technisub

Band for mounting small cylinder Aragon to cylinder, non-slip rubberized fabric, stainless steel rectangular ring.

Hood to tap, colored PVC.

Divemarine 2 Tanks holder, with pvc pipes.

Chrome-molybdenum alloy steel 34CRM04. Sheet metal manufacturing cycle Single and double connection taps, satin chrome-plated brass with DIN-INT connection, thread pitch M 25X2. External treatment: sandblasting with selected grit 1 layer 90 Micron of protective zinc, 5 layers of two-component epoxy primer, 3 layers of polyurethane finish treated for painting with "wet on wet" system, ogive with black-and-white stripping according to EC regulations. "

Divemarine harness technical phase cylinder with snap buckle and steel.

Chromed brass cap for sub-decompression cylinders, with HP cap and thread seal pad. Din 300 prevents the escape of mixtures in case of accidental opening of the cylinder.

Divemarine Mono Tap Left Attachment M 25x2 Convertible DIN / INT exit, 200 Bar.

Divemarine Din / int adapter for 300bar cylinder cock, chrome-plated brass.

Right Attack valve Modular 3/4 '' Gas

Cressi cylinders are made with the highest quality and safety materials and standards They are offered in 5 different litraggi: 5, 10, 12, 15 and 18 liters The new single and double connection taps are robust and reliable, made with advanced technologies that place them at the top of the category as reliability and safety. The internal air passages have been carefully studied in the project in order to guarantee maximum performance also and above all with the highest performance d

Divemarine single tank boot Green.

Strap to mount a Bombolino 0.85 1 l in the air or argon steel directly on the backrest, particularly suitable for cold water diving, deep, wreck or cave, a secondary Bombolino filled with argon is the most common method to increase the insulating properties of thermal clothing, it supplies a% u2019opzione quick installation, safe and light sources for the inflation of the dry suit.

Divemarine Twin cylinders nylon cam buckle strap.

compatible Scubapro / Cressi / Apeks / Mares

200 bar adapter M26 x 2 nitrox M-G 5/8'' air F, chrome plated brass.

Divemarine Tap Mono Attack Right 3/4 '' Gas

Divemarine Tech tube for transfer whisk 1/4 "100cm

Fixing band double tanks with nylon buckle

Band for mounting small cylinder Aragon, non-slip rubberized fabric, stainless steel eyelet.

Divemarine cylinders stainless steel cam buckle.

Cap for lateral closure of modular valve M25x2. 200 Bar

Divemarine ball Pocket for cylinder complete, Velcro closure, stainless steel exhaust eyelet, complete with double stainless steel AISI 316 w5 h12mm strap with HT tubular reflector protection 25mm (not including balloon signaling).

Rubber black valve knob – long version. Made in Italy.

Modular valve mono attack Dx M25x2. Output DIN / INT convertible, 200 Bar EN144-1

Valve Kit Parts

Divemarine Simple 300bar terminal, chrome-plated brass, for 1/4 compressor connection hose.

Nylon Din male valve cap 200 bar