Divemarine Shaker with lanyard.

Inspired by the technical diving and extremely versatile. It equipped with serrated profile that improves Lapresa even under the most extreme conditions. Made of sturdy anodized aluminum alloy and line Dyneema high visibility and low light. Carabiner in stainless steel.

Orange emergency Whistle.

-For tizip semi-dry -To avoid drying -To extend the life

The first specific degreaser for masks, new or used, with fogging problems, which DOES NOT RUIN the plastic parts of the mask. How to use: Phase 1 Spray, without diluting it, the product on the lenses, before wetting them, internally and externally, and on the internal part of the mask's face (recommended quantity about 7/8 ml) Phase 2 Scratch vigorously for 4/5 minutes, with a brush or a sturdy cloth, the internal and external surface of the lenses. Phase 3 Leave the

Mac Sharpening Stone 8x20x70

Useful to ensure the accessories and decompression cylinders. Stainless steel AISI 316. Available in different sizes with rotating ring.

the spiral cable provides over 50 cm of extension stainless steel ring quick release buckle

New knife with blade tempered and polished stainless steel for maximum corrosion resistance.

Divemarine finger reel suitable for scuba diving with lines of 15, 30 and 45 meters. FEATURES reel size: 15-30-45 mt line diameter 1.8 mm double stainless steel carabiner

45 pages of clipboard. Stackable sheets of paper ideal for scuba diving.

Anti-fog bio gel.

RAZOR KNIFE: Blade length 8,5cm Knife length 18cm

Stainless steel knife equipped with a 11.5 blade.

Disinfecting Mares for all underwater equipment. Triple action: fungicide, bactericidal and virucid. It guarantees total disinfection, cleaning and sanitation. Compatible with plastic, nylon, neoprene and metal. 125 ml pack

High quality talc that helps preserve latex and rubber seals, it facilitates wearing wetsuits for water sports and it helps prevent irritation.

Seac Couple straps knife with stainless steel buckle.

Reel scubapro 15 meters with double bronze clasp.

The new Black Witch glue (toluene free formula) is ideal for rapid (60 minutes) repairs of tears and lacerations of neoprene, for sealing joints, for gluing latex products. Note: For repairs of large abrasions, or if rapid drying is not required, the use of McNett Aquasure adhesive is recommended.

Slate fluorescent arm to easily communicate underwater.

Mac APNEA 9 knife suitable for spearfishing and scuba diving, it has a stainless steel blade W 1.4116 which makes it very robust and resistant, it is also equipped with a stainless steel part on the bottom of the handles useful as a booster during diving. The blade is made up of a smooth part and a serrated part with a sole cutter. Complete with quick release case and straps for attachment to the arm or leg. Blade with rod disengage. Completely produced in ITALY. Hardness: 55-56HRC

One-piece diving knife with protective black Teflon coating, 95 mm tempered double-edged AISI 420 stainless steel blade, smooth and serrated, and line cutter. Length 200mm. Safety grip on both sides of the handle, ultra-resistant fabric sheath with velcro closure. It hooks on with two strap straps included.

Very compact knife, total length including 16cm sheath suitable for freediving and freediving. 420 stainless steel blade with double-edged blade one smooth the other notched. New ergonomic handle with an attractive design, available in acid green color. Quick release system. Suitable for forearm, arm, calf and belt. Technical specifications: BLADE LENGTH: 80mm TOTAL LENGTH: 160mm GRINDING LENGTH: 70mm

High quality 316 marine stainless steel with black ceramic coating, corrosion and rust resistant, easy to use even with thick gloves, to fix the equipment elements in the suit pockets, to temporarily store the lamp head with canister, to fix a primary reel, a spool, a waterproof notebook, a backup mask, etc.

Mac knife with stainless steel blade. Knife length: 28cm. Blade length: 15.6cm.

Finger Spool stainless steel 15mt with carabiner 100mm

Divemarine double spiral clip in polyurethane with a Kevlar core and an acetal hook, ideal for scuba diving.

multifunctional strap with hook the hook offers ample fixing functionality quick release male / female buckle

Omer S2 INOX FISH SCALER: comprehensive tool that allows any flake fish in a short time.

Wet and dry suit repair kit: 1x 5gr BLACK NEOPRENE GLUE 1x 5gr STORMSURE 1x NEOPRENE PATCH 2x 75mm SELF-ADHESIVE WATERPROOF PATCHES 1x SELF-ADHESIVE WATERPROOF TAPE

Knife with ergonomic handle, 4 mm 420a stainless steel blade, treated with pvd system, 98 mm blade length, micro serration along the entire blade, excellent cutting power, blade with special hole to free rods stuck in rocks, system quick release to speed up use, it can be fixed to the arm, calf or belt, two straps, quick release buckles.

Cressi Sub mastic is a black quick-drying glue used by Cressi for decades for all types of Neoprene gluing, indispensable for spear fishing, diving or for all kinds of neoprene to repair. Made in Italy with a specific composition for neoprene presented in tubes of 30g. To paste the neoprene, clean and dry both sides to join. Put a coat of glue and let dry for 5-10 minutes until it becomes thick. For major repairs or particularly delicate ones, apply a second coat after drying of first.

Divemarine Double Ended Stainless Steel Carabiner, suitable for scuba diving, available in three different sizes: 90, 100 and 120cm.

Mac SUB stiletto knife suitable for spearfishing and scuba diving, it has a stainless steel blade W 1.4116 which makes it very robust and resistant. The blade consists of a smooth part and a serrated part. Complete with case for attachment to the belt or straps for attachment to the arm or leg. Completely produced in ITALY. Hardness: 55-56HRC Thickness: 3.8mm Weight: 69 g Handle material: PP with black overmoulded TPE Knife length: 19 cm Blade length: 9 cm

NeoSlix lubrificant for wetsuits helps to ensure the entry or exit from Neoprene wet or dry suits. It also prevents skin rashes caused by abrasions and it helps to prolong the life of the suit. Suitable for usage on latex seals, neoprene, silicone and rubber.

Steel swivel snap hook 85mm

Polyurethane spiral clip kevlar core with large acetal carabiner.

Mac SUB 11D knife suitable for spearfishing and scuba diving, it has a stainless steel blade W 1.4116 which makes it very robust and resistant. The blade consists of a smooth part and a serrated part. Complete with pouch for belt attachment and straps for attachment to the arm or leg. Completely produced in ITALY. Hardness: 55-56HRC Thickness: 3.8mm Weight: 112 g Handle material: PP with black overmoulded TPE Knife length: 21.5 cm Blade length: 11 cm

Small knife with new sheath locking system. Daga blade resists dulling. The handle features a stuck shaft remover.

Mac knife with AISI420B stainless steel blade. Hardness 54-55 HRC. Blade length 15cm

Mac SUB 9 C knife suitable for spearfishing and scuba diving, it has a stainless steel blade W 1.4116 which makes it very robust and resistant. The blade consists of a smooth part and a serrated part. Complete with case for attachment to the belt or straps for attachment to the arm or leg. Completely produced in ITALY. Hardness: 55-56HRC Thickness: 3.8mm Weight: 100 g Handle material: PP with black overmoulded TPE Knife length: 19 cm Blade length: 8.7 cm

Latex swimming cap, ideal for freediving and swimming in all occasions such as competitions, training and free time.

Neoprene liquid mastic for small repairs, 30 g.

Freediving sticker

Designed for all those who love the sea and the outdoors who are looking for a space-saving solution to change and take a shower. Easy to assemble in an instant by opening the product itself, it mounts vertically leaving only the book opening to go into position and that's it. Once used, folding it on itself you can store it in its convenient transport bag with a minimum bulk. Equipped with an internal pocket for storing material or other items during use and a retina in the upper part of the

Mac knife with AISI420B stainless steel blade. Hardness 54-55 HRC

Overhead Glow diving slate standard with pencil. 185x150 mm

Polyurethane spiral divemarine clip with stainless steel core and 75 mm stainless steel swivel carabiner, ideal for scuba diving.