-
-
×
-
orAlready; registered? LoginEnter to verify the status of your orders,or RegisterForgot PasswordPassword dimenticata? click here
-
0
Sound call to intrigue fish • Prepared to be placed on the index • Operated with the thumb • Adjustable «ring» diameter • Can also be used comfortably with thick gloves
Spare large double wing. For rods with Diameter 7.5-8mm.
Polyester diving flag available in the following sizes: 20x30cm 30x45cm
Elastic, breathable, warm fabric. It is worn from the neckline. When active in the cold, it's important to wear a base layer that wicks sweat away from your body and keeps it dry and warm. Wear under a dry suit for added warmth. Thickness 2.5 mm
New tip and series of dedicated fins 4 laser welded fins Holes for fixing line on all fins 48 / 50Hrc heat treated Sandvik steel Assembly, polishing and manual finishing
Neoprene material for resistance and protection. Mesh material for ventilation. Non slip soft sole.
For years we have been marketing amber or black tires made by one of the main US manufacturing companies. During this period we analyzed the specifications and tested the samples of various compounds to get to choose the one that makes up this elastic. Unlike most of the other covered elastics we opted for a very fine coextrusion (1/10 of a millimeter) so as to exploit as much pure internal rubber as possible. We chose this color (much darker than the previous version) for its ability to dis
Elastic Sigalsub Extreme Boiled. Here are the recommended measures: Length 14cm -> Rifle 50 Length 16cm -> Shotgun 60 Length 19cm -> Rifle 75 Length 22cm -> Shotgun 90 Length 26cm -> Rifle 100
Sigalsub fisherman front and back small s t-shirt
Sigalsub T-shirt with Shark front and small S back
Sigalsub T-shirt with Shark front and Fisherman back
The slide is in AISI 304 stainless steel with a thickness that varies depending on the model, it is available on the right and on the left, it is fixed on the handle of the rifle through holes, slots, cavities that already exist. The slide is designed specifically for each brand or model of rifle, and the dovetail shape allows the safe and rapid insertion of the mobile arm. In addition to the slide, the package also contains all the screws necessary for fixing and, in some cases, the instruction
Sigalsub Spearfishing camouflage cap with visor
Made of burnished stainless steel, this mechanism for wooden spearguns is characterized by an extreme sensitivity of release of the rod with consequent negligible effort of the finger on the trigger. The line release is incorporated in the mechanism and releases the line at the same time as the rod is released; it is possible to mount the line release both on the right and on the left, removing and repositioning a single screw. The contact points between trigger and lever are rectified.
Linear rubber bands, model Reactive Evo. Below are the lengths on the recommended rifles: Elastic 14cm -> Rifle 50 Elastic 16cm -> Shotgun 60 Elastic 19cm -> Rifle 75 Elastic 20cm -> Rifle 80/90 Elastic 22cm -> 90/100 rifle Elastic 24cm -> Rifle 90/100 Elastic 26cm -> Rifle 100
Adjustable trigger with "soft" release Clean sight line Quick target alignment Exceptional swing thanks to the reel set back Handle with ADI registration no. 3105 of 16/11/15 adaptable to any type of modern propulsion Model: rifle with elastic propulsion that can be broken down into three pieces Handle: ergonomic structure, orange or white heat-rubber butt plate, hook arrangement Release mechanism: all in stainless steel, set back Line release: claw, stainless steel, interchang
METAL RED mask in non-reflective matt black silicone with red frame
Long lever mechanism, suitable for heavy loads, the length of the lever makes the trigger very easy to operate. Its main feature is the fixing without traditional side pins, it is mounted on the speargun by means of three screws, its support points are all flat, the contact points between the tooth and the trigger are ground to create less friction.
Power 1050 lumens 3000 mAh rechargeable battery Battery status indicator Very light and small in size Wrist strap and briefcase Car charger and USB adapter Bulb: 1 * Cree XM-L2 (U4) Maximum brightness level: 1050 lumens Amplitude of light beam: 10 ° Autonomy per min: 300 min Autonomy at max: 120 min Brightness intensity: 7600 cd Lens: 5 mm in tempered glass Rechargeable battery included: 1 * 18650 - 3000 mAh lithium battery Surface treated with high anodizing mater
Disponibile con bobina da: 60, 80 e 100cm Telaio in acciaio inox AISI316 Bobina in alluminio Sistema antisparruccamento Manovella di riavvolgimento a scomparsa Frizione a doppia azione Peso: 132gr (Edy Alu 60), 160gr (Edy Alu 80), 214gr (Edy Alu 100) Portanza filo diam. 1,5mm: 30mt (Edy Alu 60), 45mt (Edy Alu 80), 75mt (Edy Alu 100) COD. 593-MUL60A ø 60 594-MUL80A ø 80 595-MUL100A ø 100
Long lever mechanism, suitable for heavy loads, the length of the lever makes the trigger very easy to operate. Its main feature is the fixing without traditional side pins, it is mounted on the speargun by means of three screws, its support points are all flat, the contact points between the tooth and trigger are ground to create less friction.
MICRO 3.0 UNDERWATER WATERPROOF CAMERA The new Micro 3.0 Underwater Camera, the latest third generation version of the popular waterproof Micro series. The Micro 3.0 camera is infiltration-proof, without O-rings to be lubricated or maintained: you will forget the fear of flooding the camera. Like its previous versions, the Micro 3.0 camera features an ergonomic and compact design with simple controls and easy-to-use menus. The camera has a 16 megapixel Sony® CMOS image sensor and offers
More advanced camera SeaLife Enjoy full creative freedom with the new Digital Underwater Camera DC2000 SeaLife. Offering a large SONY ® capacity of 1 "type of backlit 20MP image sensor and RAW format, the DC2000 will leave your scuba inspirations lead to surprising results. Full functionality with virtually unlimited editing options With a Mass at ultra-fast shooting responses and automatic fire, you'll never miss a shot with the SeaLife DC2000. Take control of your creativity choosing b
Tank: aluminum alloy cylinder with a diameter of 40 mm. Head: in light alloy with larger holes to optimize water flow Handle: ergonomic and functional, made of a single material. Barrel: with a diameter of 13 mm it allows to use 8 mm rods. Features: wide range of sizes ranging from 30 cm to 135 cm. Supplied with: steel rod, injector, harpoon, line.
Seac Din / Yoke adapter bracket for underwater regulator
Ogive XL for tying rubber bands on spearguns. To make this product, we started with a 4mm AISI 316 rod, which is then folded and modeled to make it hook. A second fold carried out on the arms brings the elastics back in line after the insertion on the notches or pins. Also in this case having left a round surface, the possibility of abrasions in case they get out of hand is considerably reduced. The particular shape makes them extremely resistant, so that they can withstand even very hig
Wire ligatures for ligatures are very popular for assembling spearguns. To make this ogive, we started from Giorgio Dapiran's “articulated bow †, which was made for him until a few years earlier. A harmonic stainless steel wire with a breaking load of 1800N / mm2 was used as a coupling system: practically, despite being a different material, the same characteristics as the Sandvik steel used for the Tahitian. This material has a remarkable elastic return and a mechanical resistance of ab
To assemble the spearguns, the idea of making this product was born from the request / advice of the friend Michele Rubbini, to have a spinner perfectly compatible with the Mr. Carbon. It was therefore decided to modify the spinner XL, keeping the characteristics and dimensions unchanged and bringing the center distance of the holes to 32mm. In this way we have obtained an ideal product to be used on the C4, but which is also the best compromise between the measures of the various commercial
Rod with notches for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Processing with special tips to leave all holes beveled and mirror polished.
Rod with pins for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. Filing and polishing of the lower part of the pins after planting. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Processing
Rod with pins for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. Filing and polishing of the lower part of the pins after planting. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Processing
Rod with notches for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Processing with special tips to leave all holes beveled and mirror polished.
Rod with notches for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Processing with special tips to leave all holes beveled and mirror polished.
Rod with notches for spearguns. Made of heat treated Sandvik steel. Hardness: about 10% more than the previous production. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. Hand-modified fins to ensure that they do not close after passing the fish. Filing and polishing of the lower part of the pins after planting. "Slide" on all millings (fins, shank) to avoid sharp edges and sharp points. Manual file finishing of all parts with "burrs". Process
New tip and series of dedicated fins 4 laser welded fins Holes for fixing line on all fins 48 / 50Hrc heat treated Sandvik steel Assembly, polishing and manual finishing
Rod with pins for spearguns. Made of heat treated Sandvik steel. Springback: up to 30% faster. Stiffness: up to 15/20% more than the previous ones. With fully retractable flap in the rod profile, with no rivets or protrusions that create friction. Significantly increased accuracy and shooting speed.
SIGALSUB fisherman front and shark back t-shirt
Splicing for fishing nylon threads to tie the rod to the speargun, 20 pieces.
Cone from appliccare on the shafts for spearfishing, favoring to the shaft an improved hydrodynamicity and less water resistance.