-
-
×
-
orAlready; registered? LoginEnter to verify the status of your orders,or RegisterForgot PasswordPassword dimenticata? click here
-
0
The frame is in delrin, all construction components are turned from solid with cnc machines including the reel, moreover this has been lightened with numerous slots that integrate well into the overall vision. The clutch is jerky, in practice it can be positioned with the desired tension, certain that it will maintain the chosen position. The frame includes the anti-wig system with wire guide. The removable handle facilitates the recovery of the wire. Also in this reel is provided the fixi
Turned from solid in floating plastic, the stopper is in shockproof material, created expressly for cable systems, supplied with 2 o rings that can be moved at will in the 3 special seats, in two models, with high speed steel bearings (mod Iron) and with pulleys with highly smooth Sliding core (Mod. Sliding). Screw and washers M4 x 60 included.
Bracket suitable for all rifles of all brands is fixed to the rifle with the supplied screws.
Lid for the ballast compartment, indispensable for balancing your weapon, has a convenient wire pass, which can be cut if necessary, leads not supplied, measures of interest 18 mm x 90 mm, complete with inserts and screws M4 x 25 mm.
Cut from a tube with external diameter 16 mm and internal 13 mm, equipped with numerous lightenings, clean design, it avoids cutting the thread against the stopper, the measures have been optimized to the best, simulating all the construction needs. Stopper tube 16x1,5x170 weight gr. 31
Cut from a tube with external diameter 16 mm and internal 13 mm, equipped with numerous lightenings, clean design, it avoids cutting the thread against the stopper, the measures have been optimized to the best, simulating all the construction needs. stopper tube 16x1,5x170 weight gr. 31
Non-linear profile designed to cushion the whiplash of the ogive end stroke to the maximum. Equipped with numerous lightenings, it has two front nails that can be used as a line stop. Supplied with 2.9 x 13 self-tapping screws Artiglio 60: thickness 2 mm, length between centers 60 mm
Adjustable both in width and height, it is fixed in the wood by means of integrated anchoring nails. Stopper 130: thickness 1.5 mm, center distance to the anchor 130 mm.
It is producted in two sizes with coil 57 mm and 74 mm voice coil, with forms that resemble those of a hawk whose wings houses a large coil. The bracket and the handle in AISI 316 stainless steel laser cut, (the handle can be mounted on the right or left) to the turned parts and cnc machined from solid, including the coil, very compact, has the hilt trigger protector built, that if necessary, you can disconnect and then you can also mount the guns trade that already have. The thread guide ar
With a small modification on the handle it is possible to insert in a single block this mechanism equipped with the Double Roll system, with this system we have reduced the friction that is generated in the contact between the parts, avoiding jamming that harden the trigger. The modification to be made is only a small cut on the handle to obtain the niche where the line release will be located. Tested at 200 Kg !!!
Finally the perfect replacement for Pathos Dangelo 1 Handle, Mechanism entirely in steel with Ermes Double Roller mechanics and side line release, it will be necessary to cut a couple of mm where the line release is and widen the where there is the safety from 4 to 6 mm, very easy to do as it is plastic. Separately, it is possible to buy Sternal Support Assembly instructions 1. Remove original mechanism by punching the rear pin out 2. Remove safety by using flat head screw driver to flick th
With the only modification of the trigger component, the Double Roll Future mechanism has been adapted for Abellan rifles. This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (Patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a pract
An absolute novelty for underwater fishing, in 3 sizes with a large capacity of 1.5 mm line, 50, 100, 150 meters, suitable for fishing in the blue to large pelagics, but also for bottom fishing for snappers and groupers. current reels for spearfishing there is no device that orders the line, this means that the winding line will have to be guided with a finger and depends on the operator's ability to guide it well, avoiding areas of massive overlap with others of vacuum , you will notice that cu
composed by: 1 wire guide kit, a hilt at 120 1 ballast kit
Consisting of three parts, a base, a central body where you can hook the line and a lid with a special adjustable spout that prevents the accidental release of the line, the distance is calculated to keep the elastic bands perfectly aligned on a roller. Width 26 mm.
Aligns the elastic under the barrel and prevents it from coming out after the shot, easy introduction of the line, comes with 2 screws
Aligns two pairs of rubber bands under the barrel and prevents it from coming out after the shot, easy introduction of the line, comes with 4 screws
The Roll head was created for roller systems but can be converted into an inverter if necessary, in fact it can accommodate the particular high-load pulleys for inverters, which coupled to the U-shaped or square Stopper is optimal for cable inverter systems. The pulleys are chosen from Glass, mono-Iron, and Sliding, The free holes and the hole in the coupling, can be used if necessary to balance the head with common lead. CNC machined from solid, in very sturdy delrin, it has no additional ste
Turned from solid in floating plastic, the stopper is in shockproof material, created expressly for cable systems, supplied with 2 o rings that can be moved at will in the 3 special seats, in two models, with high speed steel bearings (mod Iron) and with pulleys with highly smooth Sliding core (Mod. Sliding). Screw and washers M4 x 60 included.
This mechanism now has the possibility of assembling the Roll system in internal components, with a demoltiplica function, thanks to its innovative internal components (patent pending), this system allows you to have sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum actuation effort of the trigger 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration of the component for hooking the rod. A system that is still to be discovered a
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (Patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. In addition to the new look, this mechanism has minor changes in b
This mechanism now has the possibility of mounting the Roll system in the internal components, with gear reduction operation, thanks to its innovative internal components (patented), this system allows you to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, ( maximum trigger effort 0.500 kg on traction of 300 kg !!!) with a practically unlimited duration of the rod coupling component. A system that has yet to be discovered and that always puts us one
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. When we designed this mechanism we made sure that this device (backw
Backward Mechanism, same features and size of the back, easy installation with only 3 screws from the top, in the version Roll suitable for large loads. Adjustment by washers. titanium effect. Size: height: 22,5 mm width : 16 mm length : 46 mm total : 65 mm
L-folded, thanks to the numerous holes it also acts as a reel seat
Pre-bent to L at 120 degrees, thanks to the numerous holes it also acts as a reel seat
This mechanism mounts the Double Roll system, with gear reduction operation, thanks to its innovative internal components (patented), this system allows for a sensitivity on the trigger that is unthinkable with traditional mechanisms at very high loads, (maximum trigger effort 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration. This model is the most modern mechanism of our production, a little longer than the Back line, in fact it measures 6.5 mm at the hole, for those w
This mechanism mounts the Double Roll system, with gear reduction operation, thanks to its innovative internal components (patented), this system allows for a sensitivity on the trigger that is unthinkable with traditional mechanisms at very high loads, (maximum trigger effort 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration. This model is the most modern mechanism of our production, a little longer than the Back line, in fact it measures 6.5 mm at the hole, for those w
This mechanism mounts the Double Roll system, with gear reduction operation, thanks to its innovative internal components (patented), this system allows for a sensitivity on the trigger that is unthinkable with traditional mechanisms at very high loads, (maximum trigger effort 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration. This model is the most modern mechanism of our production, a little longer than the Back line, in fact it measures 6.5 mm at the hole, for those w
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (Patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. In addition to the new look, this mechanism has minor changes in bot
This mechanism mounts the Roll system combined with another roller that interacts with the trigger, with demoltiplica operation, thanks to its innovative internal components (patent pending), this system allows you to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads. , (maximum actuation effort of the trigger 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration of the component for hooking the rod. This model is the most modern
This mechanism mounts the Double Roll system, with gear reduction operation, thanks to its innovative internal components (patented), this system allows for a sensitivity on the trigger that is unthinkable with traditional mechanisms at very high loads, (maximum trigger effort 0.500 Kg on traction of 300 kg !!!) with a practically unlimited duration. This model is the most modern mechanism of our production, a little longer than the Back line, in fact it measures 6.5 mm at the hole, for those w
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (Patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. In addition to the new look, this mechanism has minor changes in b
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (Patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. In addition to the new look, this mechanism has minor changes in b
This mechanism now has the possibility of mounting the Roll system in the internal components, with gear reduction operation, thanks to its innovative internal components (patented), this system allows you to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, ( maximum trigger effort 0.500 kg on traction of 300 kg !!!) with a practically unlimited duration of the rod coupling component. A system that has yet to be discovered and that always puts us one
This mechanism now has the possibility of mounting the Roll system in the internal components, with gear reduction operation, thanks to its innovative internal components (patented), this system allows you to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, ( maximum trigger effort 0.500 kg on traction of 300 kg !!!) with a practically unlimited duration of the rod coupling component. A system that has yet to be discovered and that always puts us one
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. When we designed this mechanism we made sure that this device (backw
This mechanism now has the possibility of mounting in the internal components, the Double Roll system, with reduction operation, thanks to its innovative internal components (patented), this system allows to have a sensitivity on the trigger unthinkable with traditional mechanisms at very high loads, (maximum triggering effort 0.500 kg on 300 kg traction !!!) with a practically unlimited duration of the rod coupling component. When we designed this mechanism we made sure that this device (backw
This useful tool has been designed to be applied on the whole series of Ermes mechanisms, the wheel can be positioned to the right or left, it can also be operated by holding it comfortably in the hand and attached to the wrist. The firing pin beats against the gear emitting a click with variable intensity controlled by the operator, various species are attracted by the characteristic ticking and it is in the imagination of the fisherman to adapt to the situations that arise. For all ermes mec
For all ermes mechanisms and for wooden spearguns in general.
Single block with two Derlin pulleys, allows you to attach up to 7 elastic bands for geared inverter systems, openable, light, the pulleys are in derlin without bearings, we opt for this solution as the micro bearings currently on the market do not allow exaggerated loads.
Single block with two Derlin pulleys, allows you to attach up to 5 elastic bands for geared inverter systems, openable, light, the pulleys are in derlin without bearings, we opt for this solution as the micro bearings currently on the market do not allow exaggerated loads.