Kit 10 balls for ligatures, M4 threaded

Omer wishbone Normal 16mm

Protection cone for olives of spearfishing spearguns.

Cressi Sub ogiva Standard

Wishbone BIG with nylon threaded plugs.

Salvimar small wishbone Nylon bushes

Salvimar wishbone Dyneema with spheres

Salvimar wishbone Eco

junction terminal realized in a special line dyneema studied by 2 mm for rods with notches, pins or "shark fin" specially filed no parachute effect, increase in speed.

Reinforced and movable headband. Specific to optimize the arrangement of the second tire, available with ball arms or nylon rings Ø16, Ø20.

Salvimar small wishbone with spheres

Salvimar wishbone BIG with spheres

Mares Speed wishbone

Mares wishbone Lario

Mares Articulated wishbone Lario Bind

Kit n3 Mares Speed olives in Dyneema with high resistance Teflon balls. Designed for elastics with ligatures for spearguns for spearfishing.

Stainless steel ogive with 16mm bushings

Omer French Short Articulated wishbone

Articulated wishbone with nylon bushings.

Omer French Articulated wishbone 16 mm

Model: Seatec Ogive Sphere Manufactured by: Seatec

Salvimar wishbone Dyneema with arms

Perforated brass balls to create dyneema olives. Hydrodynamic shape for easy insertion inside the elastic.

Omer Articulated Ogive With Spheres.

Salvimar pro threaded balls.

Salvimar kit Threaded balls 10pcs.

Salvimar Articulated wishbone whit ball

Spinner in AISI 304 stainless steel. Wire Ø 4 suitable for elastics without bushing.

Wire ligatures for ligatures are very popular for assembling spearguns. To make this ogive, we started from Giorgio Dapiran's “articulated bow †, which was made for him until a few years earlier. A harmonic stainless steel wire with a breaking load of 1800N / mm2 was used as a coupling system: practically, despite being a different material, the same characteristics as the Sandvik steel used for the Tahitian. This material has a remarkable elastic return and a mechanical resistance of ab

Kit of two Salvimar wishbones with stainless steel bow and 16mm nylon bushings for mounting a pair of elastic bands on spearguns. For this reason, the kit includes two spinners with narrow headband for the first internal elastic and one spinner with large headband for the second elastic. In this solution Salvimar guarantees the perfect alignment of the two elastics while remaining parallel to each other.

Salvimar velox headband.

These ogives, with 2 mm steel wire arch, differ from the classic ball ogives, for the rapid disassembly that does not require the release from the tires. Also available in the version with universal threaded ring nut.

To assemble the spearguns, the idea of making this product was born from the request / advice of the friend Michele Rubbini, to have a spinner perfectly compatible with the Mr. Carbon. It was therefore decided to modify the spinner XL, keeping the characteristics and dimensions unchanged and bringing the center distance of the holes to 32mm. In this way we have obtained an ideal product to be used on the C4, but which is also the best compromise between the measures of the various commercial

Arms for dyneema olives ensure an easy and quick replacement of the line. Suitable for mounting on bespoke rubber bands of speargun spearguns.

Kit of two Salvimar ogives with stainless steel bow and brass balls for mounting a pair of elastic bands tied on spearguns. For this reason, the kit includes two spinners with narrow headband for the first internal elastic and one spinner with large headband for the second elastic. In this solution Salvimar guarantees the perfect alignment of the two elastics while remaining parallel to each other.

Articulated wishbone, Velox bow. 16mm hydro bushes.

Articulated wishbone with removable ø2mm bow with ligature balls

Pathos wishbones are built with the best sandvik steel, to guarantee their durability and performance. All the angles formed by wishbone-elastic-rod have been studied in order to optimize the effort and not to lose energy in the shooting phase.

Salvimar multitool for inserting balls into any size elastic band for the creation of customized rubber bands with dyneema and non-dyneema olives.

Mares wishbone articulated sf

Omer wishbone Dyneema that makes it possible to replace or adjust the line very easily without opening the tires.

This kit is made up of two nylon "spheres" with a Dyneema eyelet which must be inserted in the tires and therefore tied in fashions cannot come out. The further piece of Dyneema is tied to the two eyelets in order to complete the spinner. In this way, the part that wears is only the piece in Dyneema between the two eyelets that can be replaced easily and very quickly.

Ogive XL for tying rubber bands on spearguns. To make this product, we started with a 4mm AISI 316 rod, which is then folded and modeled to make it hook. A second fold carried out on the arms brings the elastics back in line after the insertion on the notches or pins. Also in this case having left a round surface, the possibility of abrasions in case they get out of hand is considerably reduced. The particular shape makes them extremely resistant, so that they can withstand even very hig

Articulated ogive bind.

Cressi Ogiva Leggera Articola suitable for spearfishing with any type of speargun very versatile and robust thanks to its mobility as it facilitates the loading process, especially in the final stages. Removable smoby headband in tempered AISI 304 stainless steel. High quality threaded Delrin bushings. Bushing diameter 16mm.

Highly resistant ogives in stainless steel, have a joint that facilitates loading. Suitable for oversized bands.

Salvimar Eureka Head Kit. Adapters for mounting elastic bands by the meter on spearheads of spearguns for spearfishing. The ring nut is free to turn.

Articulated wishbone with removable ø 2mm bow.