Reflective stickers, very useful to simulate the reflections created by the shoals of small fish to attract predators in the area. They can be applied on the fins of the fins and on the stems of the rifles.

Mounting kit for freediving fishing fins Omer Stingray. The kit is for a single fin.

Omer fixing kit for freediving Eagleray fins consisting of 2 screws, pins and under pin. Each kit is for mounting a single fin.

Mounting kit for freediving fishing fins Omer Stingray. The kit is for a single fin.

Salvimar T-profile for freediving fins and spearfishing in fiber. Easy to apply and install. Price per meter.

Kit for fixing the Motus shoe on the blades. Consisting of a pair of stainless steel screws and plugs. The kit is for a single fin.

Sporasub kit for assembling spitfire fins. Consisting of dowels, stainless steel screws and pin. kIt for a single fin.

Reflective stickers, very useful to simulate the reflections created by the shoals of small fish to attract predators in the area. They can be applied on the fins of the fins and on the stems of the rifles.

Divemarine Couple Set Rubber Fins.

Fixing kit for mares Razor fins consisting of 2 screws, pins and under pin. Each kit is for mounting a single fin.

Channelers for freediving fins and spearfishing. Easy to apply and install. One pair provides for mounting for a fin. Length 65cm.

Paddle anchor bolts with stainless steel screws for Salvimar fins. The kit is for a single fin.

Omer right and left metal clip for Pelizzari fins.

Screw kit for a pair of c300 shoes

Screw kit for a pair of 400 shoes

Kit for fixing Salvimar Step shoes on the blades. Consisting of a pair of stainless steel screws and plugs. The kit is for a single fin.

Modular race boot assembly kit. Kit inclusive for a single fin.

Mares insoles for freediving fins, conceived for spearfishing, thanks to these insoles it is possible to use higher number shoes so that they can be worn with 5mm and 3mm shoes thanks to the mounting of the insoles.

Cressi insoles for freediving fins, designed for spearfishing, thanks to these insoles it is possible to use shoes with a larger number so that they can be worn with 5mm and 3mm shoes thanks to the mounting of the insoles.

Omer Up-F1 Shoe Assembly Kit Umberto Pelizzari. Without side clips.

Adapter kit to be able to mount the 300/400 shoes on blades not born for this type of specific shoe.

HIGH PERFORMANCE WATER RAILS are compatible with all Cetma blades. The variable height of the profile gradually increases towards the tip of the blade improving its efficiency and reducing excess rubber. They can be used as spare parts or if you want to change color. Each pack contains 4 Water Rails.