Whip standard actuator 3/8 "M-9/16" F, black rubber hose, 35bar EN250.

Lightweight and flexible low pressure hoses, multilayer construction with excellent abrasion resistance. At Metalsub, we have never used polyester polyurethane (polyester-TPU) like other competing manufacturers have. For this reason, there is no possibility of internal crystallization in our tubes. All assembled tubes are tested and cleaned before shipping. Hoses with regulator thread, 3/8 "UNF male and 9/16" UNF female swivel.

Best divers standard hose regulator rubber: 9/16 "f - 3/8" m

The series called XTREME was designed with the aim to offer each diver the greatest possible security while diving. The tubes of this series are characterized by the outer cover in nylon braid abrasion resistant, which is not fitted on the hose assembly (as happens today in cases where a sock is added as protection) but braided directly on the tube, and fixed to the same by bushes in stainless steel or brass. This particular type of process, which is performed by automatic lines, allows you

Dispenser hose XTREME XT-TECH 3/8 "9/16" F; polyurethane hose with anti-cut coating, 35 BAR EN25

The series called XTREME has been designed with the aim of offering every diver the greatest possible safety during the dive. The tubes of this series are characterized first of all by the external cover in abrasion-resistant nylon braid, which is not fitted on the jointed tube (as happens today in cases where a protective stocking is added as an accessory) but braided directly on the tube, and fixed to the itself by means of stainless steel or brass bushes. This particular type of processin

Best divers standard whip rubber octopus

Standard hose 3/8 "M-9/16" F, black rubber hose, 35bar EN250.

The series called mares whips has been designed with the aim of offering each diver the greatest possible safety during diving. The hoses of this series are characterized above all by the external cover in anti-abrasion nylon braid, which is not fitted on the connected hose (as happens today in cases where a protective sock is added as an accessory) but braided directly on the hose, and fixed to the itself by means of stainless steel or brass bushes. This particular type of processing, which i

The series called apeks flexi whips has been designed with the aim of offering every diver the greatest possible safety during diving. The hoses of this series are characterized above all by the external cover in anti-abrasion nylon braid, which is not fitted on the connected hose (as happens today in cases where a protective sock is added as an accessory) but braided directly on the hose, and fixed to the itself by means of stainless steel or brass bushes. This particular type of processing,

Standard hose 3/8 "M-9/16" F, black rubber hose, 35bar EN250.