Stainless steel screw with flat head without cutting the washer and wing nut stainless steel

Divemarine Knob M8 With Brass inner part for double tanks.

Pair of stainless steel screws male / female for fastening pocket flask of plate steel or aluminum wing jackets for scuba diving.

Screws for aluminum plate for backplate

Divemarine pocket Pedagno/Spool holder. Reel not included.

■ SLIDING RUBBER D-RING COMPATIBLE WITH ALL 50/52 MM BELTS ■ CAN BE MOVED FORWARD (TIGHTENING THE ENDS) WHEN CYLINDERS BEGIN TO FLOAT MORE FOR MORE ACCURATE TRIM CONTROL ■ EXTREMELY ADHERENT ■ WEIGHT: 0.01 KG - EXTERNAL DIAMETER: ~ 50 MM - THICKNESS: 8 MM - 4 PIECES

Nylon cam Buckle 50mm.

Standard adjustable sternum straps with fastex and D-ring stainless

Sternal straps, adjustable side, fastex and D-ring stainless

25 mm tape, male + female clip

Best Divers Nylon Backrest Without Straps

Couple stainless steel screws for fixing the technical backrests.

■ ALLOWS YOU TO EASILY ADJUST THE RIGHT SIDE OF THE HARNESS STRAP ■ MADE WITH PRECISION IN AISI 316 STAINLESS STEEL ■ STRONG AND DURABLE, THE BEST ALTERNATIVE TO PLASTIC CLIPS ■ COMPATIBLE WITH ALL MARES RIGID PLATES (ALUMINUM AND STEEL STAINLESS)

Divemarine Twin cylinders nylon cam buckle strap.

- Velcro closure system -To store and protect your mask -Can be attached to the belt -Dedicated anti-fog pocket

50mm black cordura under-belt with 2 stainless steel d-rings.

They can be used to mount the bag or anchor accessories on the back plate. Available in 3/8 ". Thanks to the multiple uses, they are a useful element to keep in your dive tool kit.

Pocket pocket pocket for ballast up to 2 kg with velcro flap for quick release.

Divemarine Bellows pocket, fabric bottom for sticking on dive suit, heavy duty 80mm velcro closure, stainless steel grommet.

Divemarine mask holder pocket, holds up to 3kg, heavy duty 80mm velcro closure, stainless steel grommet, black polyester fabric 600.

Divemarine PVC Backpack For cylinder without straps.

Seac Pocket Door Leads Back To Direct fixing strap tank.

Fixing band double tanks with nylon buckle

Divemarine cylinders stainless steel cam buckle.

1200D Ballistic Nylon from. Plot from 600D Polyester. Foldable, large and expandable. internal reinforcement in black polyurethane. 1 oversized clip. Long nylon strap that allows the full expansion of the pocket. 1 large eyelet nylon slide the sling strap.

A Best Divers production made in Italy. Cam buckle in stainless steel for fixing bands of the jacket to the cylinder.

EASY TO INSTALL ON THE BOTTLE HEAD DOUBLE EYELET FOR IDEAL POSITIONING ON THE TANK PERFECT TRIM LESS WEBSORE ON THE BELT BALLAST CAPACITY: 2KG EACH

Q&S (Quick&Safe) quick-release pocket for integrated weights up to 4 kg.

Divemarine weight pocket, holds up to 3kg, heavy duty 80mm velcro closure, stainless steel grommet, black polyester fabric 600. 9,5x12x4,5cm

■ MADE WITH PRECISION IN AISI 316 STAINLESS STEEL ■ ROBUST AND DURABLE ■ EASY ALTERNATIVE TO TRADITIONAL FLAP / BUTTERFLY NUTS ■ KNURLED SURFACE FOR EASIER GRIP ■ 28 X 14MM AND 28 X 18MM WITH CENTRAL HOLE ■ 2 PIECES

Divemarine Twin cylinders stainles steel cam buckle strap.

Best Divers Nylon Band For Twin Cylinder

Divemarine weight pocket with Fastex, holds up to 3kg, heavy duty 80mm velcro closure, stainless steel grommet, black polyester fabric 600.

Divemarine leg pocket, adjustable, to fit every kind of suit.

Scubapro Bungee Hydros accessory set

INGUINAL CNGHIAGGIO X-TEK • 50 mm tape, adaptable to all backrests • Complete with 2 stainless steel D-rings

Of 1200D ballistic nylon ". Main pocket of large volume with zipper closure. Internal elastic cord, D-ring stainless steel interior. front pocket with zipper closure. 2 large occhiellini nylon sections to slide on dell 'harness belt. 2 small loops standard belt. 2 drainage eyelets on the bottom.

Divemarine Cargo pocket with velcro closure, external flap with zip, stainless eyelet, double rear loop, double elastic inside for attaching accessories. 17x19x8cm

Optional accessory pocket to fix on the belt of the harness. With two compartments supplemented by a D-ring that allows you to secure the accessories. Available in two sizes. The price refers to a single pocket.

These pockets can be mounted on the belt or on the cylinder to act as a counterweight and optimize buoyancy in the water. Each can accommodate up to 2kg in weight

Pocket that can be added to all new mute mares flexa through an easy and intuitive clip system, the system of protection from rubbing allows better grip during the dive and prevents damage to the suit.

Scubapro X-tek Cover sidemount

Cargo Thigh Pocket (complete pocket with clips and straps) Attaches to BCD D-ring & thigh. Ideal for storing instructor slates, torches, marker buoys, spare masks, compact cameras. Quick attachment via carabiner & thigh strap.

1000 denier Cordura pocket for buoy deco to be mounted on all types of backpacks and technicians BCD jackets.

Best Divers Padded Shoulder Straps For Backrest, for 50mm tape, pack of 2.

Divemarine Large pocket with upper zip, stainless steel eyelet, 600 black polyester, double rear loop, double internal elastic for attaching accessories. 14X22X7

It supports up to 4 kg, 1200 d ballistic nylon and 600 d modular polyester exterior: it can be installed on any mares xr harness, it can be placed on the shoulder straps or on the ventral strap, high strength velcro in cold water with a single system of closure. Integrated flat D-ring, elegant, durable (resistant to chafing, tearing and abrasions), light and made with long-lasting materials of the best quality.

Mares Xr Flat Head Dead Bolt Screw Black 4pcs: ■ STURDY AND DURABLE SCREWS FOR ALL TYPES OF FIXING ■ MADE WITH PRECISION IN AISI 316 STAINLESS STEEL ■ 11MM FLAT HEAD BOLT WITH O-RING ■ ACCESSORIES FOR ADDITIONAL CONFIGURATIONS ■ 4 PIECES (1 PIECE = MALE + FEMALE + O-RING) ■ TO BE USED ALSO WITH ALUMINUM BACKRESTS WITH O-RING TO AVOID ANODISING